0.40mm Glue Dispensing Musashi Need

Product Specification Product Show An apparent discontinuous glue spot Discontinuous glue point sizes affect the overall consistency of bonding strength between components and PCB. There are several reasons for this phenomenon: The thimble of the needle falls on the pad. A different needle can...

Send Inquiry

Description

Product Specification

Product name	0.40mm Glue Dispensing Musashi Need
Material	Stainless steel, etc.
Inside diameter	0.1-0.8 mm or customized diameter
Properties	High precision dispensing, micro dispensing.
Custom feature	According to your 2D/3D Drawing or sample provided
Package	Standard carton or according to customer's requirement
Certification	ISO13485

Product Show

An apparent discontinuous glue spot

Discontinuous glue point sizes affect the overall consistency of bonding strength between components and PCB. There are several reasons for this phenomenon:

The thimble of the needle falls on the pad. A different needle can solve this problem. And not enough recovery time. Adding a delay solves the recovery problem. Then, or with the horizontal line of the glue surface falling, the pressure time is not enough to complete the glue dropping cycle, you can increase the ratio of pressure and cycle time, to correct the problem of the size of the glue point discontinuity.

6-1