Precision Dispensing Needle Conical 0.2 mm

Product Specification Product Show 1. Four principles: small point - small needle, low pressure, short time large point - large needle, high pressure, long time thick glue - oblique needle, high pressure, set the time according to the needs of water-based liquid - small needle, low pressure, Set...

Send Inquiry

Description

Product Specification

Product name	Precision dispensing needle conical 0.2 mm
Material	Stainless steel, etc.
Inside diameter	0.1-0.8 mm or customized diameter
Properties	High precision dispensing, micro dispensing.
Custom feature	According to your 2D/3D Drawing or sample provided
Package	Standard carton or according to customer's requirement
Certification	ISO13485

Product Show

1. Four principles: small point - small needle, low pressure, short time large point - large needle, high pressure, long time thick glue - oblique needle, high pressure, set the time according to the needs of water-based liquid - small needle, low pressure, Set the time as required.

2. Fluids requiring special settings:

(1) Instant glue: water-based instant glue uses a safety piston and a metal needle lined with Teflon, thick instant glue uses a tapered oblique needle, and if flexibility is required, a PP needle is used.

(2) UV glue: use an amber syringe, a white plunger and an oblique needle (which can block UV rays).

(3) Light-curing glue: use a black opaque syringe, a white plunger and a UV-shielded needle.

(4) Anaerobic glue: use a 10CC syringe and a white PE universal plunger.

(5) Sealant and paste liquid: If the white piston rebounds badly, please switch to the safety type and use an oblique needle.

Epoxy cleaning

Epoxy resin (expoxy) should be cleaned actively once per shift with the storage tank of general toluene solvent. The more cleaning times, the better.

shortcoming

(This is a problem in the market to attract customers by reducing the cost of products. Therefore, when purchasing equipment, not only the price, but also the quality of the machine itself should be considered, so as to ensure stability and ensure the operability of the product as much as possible operability and operability to ensure the overall quality of the product).

1. The internal cooling system of the machine is not very good, and there are already dispensers with good cooling systems on the market;

2. Frequent crashes;

3. When the LCD is reversed, it will display garbled characters;

4. The machine shows the azimuth deviation (this will happen after running for a period of time) and the actual workpiece;

5. The electrostatic treatment is not ideal (a lot of static electricity is generated);

6. The three-axis running speed is relatively slow, which is different from the actual speed required by the manufacturer;

7. The machine will run around under normal operating conditions (this is more risky to operate);

8. When the watch and the small dispenser are used together for a period of time, the relay of the watch will be broken down, causing the output to keep leaking signals;

9. The program of the CF card is not stable enough, and the industrial computer is often burned;

10. The carrying capacity of the machine is relatively weak;

11. The connection of the driver board connector is relatively loose, which may easily lead to poor contact between the main board and the driver board (both are plastic connectors).