Aluminum Parts

Aluminum Parts For Heat Sinks

Product specification Product show Cylinder head bolt disassembly should follow a certain sequence, each time a little uniform loosening or fastening bolt, prevent bolt deformation and affect the

Aluminum Dashboard Parts

Product specification Product show Surely not all! 340,380 all the same. The main structure of the current aircraft are aluminum alloy, composite materials are not much. It is said that the 787 will

Aluminium Parts For Marine Accessories

Product specification Product show B: Yes, the main material used in airplanes is aluminum alloy, followed by steel, composite materials and titanium alloy. And now the proportion of composites and

Aluminum Electronic Accessories

Product specification Product show The wire of bolt has in turn by common: carbon steel, stainless steel, rusty iron, copper, aluminum. Carbon steel is divided into low carbon steel, medium carbon

Aluminum Coupler Parts

Product specification Product show General design does not consider the force of the nut and the force of the wire, as long as in accordance with the requirements of the selection of enough tapping

Aluminum Camera Parts

Product specification Product show 1. Differences in composition The main elements of aluminum alloy shell are aluminum, silicon, copper, magnesium and zinc. According to the different content of

Anodized Aluminum Parts

Product specification Product show Aluminum alloy doors and Windows are installed with fixed piece connectors fixed on the wall. The fixed sheet is mostly 1.5mm thick galvanized sheet, the length can

Aluminum Parts For Computer Case

Product specification Product show What parts do aluminum profile fasteners refer to? Aluminum alloy profile fasteners are commonly bolts, composed of "screw head" and "screw",

Aluminum Bolt Parts

Product specification Product show Most of the industrial aluminum (Al) profile corner codes are used for the right Angle connection of two aluminum profiles, but also for the need to move the

Aluminium Connection Block Parts

Product specification Product show Finishing cutting depth: End milling cutter radial cutting depth of 0.1~0.3 mm, axial cutting depth 1D. The axial cutting depth of the face milling cutter is about

Aluminum Parts For Electrical Components

Product specification Product show 2. The workpiece (1) the amount of silicon in the aluminum workpiece will directly affect the choice of cutting speed. Generally speaking, the silicon content below

Aluminum Conductor Parts

Product specification Product show Generally speaking, the factors affecting the roughness of the machined surface include machine tools, workpieces, fixtures and cutting tools. 1. Machine tool