OEM Aluminum CNC Turning Parts

Product specification Product show That's because there's a lot of heat generated during drilling, and aluminum has a low melting point, and the melted aluminum sticks to the drill bit, so it sticks to it. It can slow down the drilling speed and give cooling time. The main idea to solve...

Send Inquiry

Description

Product specification

Product name	OEM Aluminum CNC Turning Parts
material	Aluminum 6061, Aluminum 6063, Aluminum 7075, etc.
Surface Treatment	Anodizing, Sandblasting, Painting, Powder coating, Plating, Silk Printing, Brushing, Polishing, Laser Engraving
Machining Option	Turning, grinding, milling, welding, bending, drilling, swaging, flaring, slot-cutting, stamping, deep-drawing, capping, beveling, etc.
Custom feature	According to your 2D/3D Drawing or sample provided
Package	Standard carton or according to customer's requirement
Certification	ISO9001:2015, SGS

Product show

That's because there's a lot of heat generated during drilling, and aluminum has a low melting point, and the melted aluminum sticks to the drill bit, so it sticks to it. It can slow down the drilling speed and give cooling time.

The main idea to solve the aluminum chip sticking is:

1, change the cutting speed. Generally, the sticky chip is only present in one speed zone, avoiding this zone can avoid the sticky chip. To ensure efficiency, many tool users are willing to increase cutting speeds when technology permits. Diamond (PCD) cutting tools or diamond coated, diamond-like coating (DLC) cutting tools provide technical guarantee for improving cutting speed when machining aluminum casting.

Moreover, diamond tool life is long, as long as the processing batch is large enough, it is economically worthwhile.

2, the tool before the tool surface polishing. After polishing the front tool surface reduces the friction heat between the aluminum chip and the front tool surface, and the sticky chip is the chip is welded to the front tool surface under a certain pressure and a certain temperature, polishing reduces the temperature, reduces the possibility of sticky chip.

3. Increase the front Angle. Increasing the rake Angle reduces the positive chip pressure on the rake surface. And notice here that this is the working Angle. If the knife has chamfering, when the cutting layer is thin, it will form the actual chamfering as the cutting task, and the chamfering front Angle becomes the actual working front Angle. The main casting aluminum boring, the general margin is small, this point should pay special attention to. Suggestions such as the use of carbide tools, simply do not chamfering.

4. Use a coating tool. This is also a way to reduce cutting heat. Aluminum coating is not recommended, TiB2, diamond (such as CCDia), DLC coating is recommended.

215-2

308-1

207-1 204-1

297-1 245-1 72-1

Our factory

Production equipment

Equipment List	Brand	Type	Working Track	Tolerance (mm)	Quantity (Set)
CNC Milling Machine	FANUC	FANUC Machining Center	500400320	0.01	15
Brother	Brother Tapping Center	500400300	0.02	10	1
HATEN	Drilling & tapping machine		0.02	5	2
LK	Machining Center		0.02	7	2
Harvest Star	CNC Machine	depend on different models	0.015	10	1
Mazak	Vertical Machining Center	910550450+30-(-120)0-360	0.005	1	2
SYNTEC	Vertical Machining Center	530400300	0.01-0.005	1	2
Tmt	CNC Machine	depend on different models	0.01	8	2
Sihai	Machining Center		0.02	2	1
Kangcheng	Machining Center		0.02	2	1
Taikan	Machining Center	depend on different models	0.01	110	2
Renishaw	Probe		0.01	80	1
CNC Turning Lathe	Schutte	CNC Lathe	depend on different models	0.005	2
TSUGAMI	CNC High Precision Lathe	depend on different models	depend on different models	2	1
HELONG	CNC Lathe	depend on different models	0.01	20	2
Slotting Machine	YUYI	CNC Slotting Machine		0.01	1