CNC Machining Copper Parts For Solar Equipment

Product specification

Product show

The best way to prevent metal oxidation is to keep the metal away from the air. There are several methods: Electroplating, alloy, blue processing, painting, difficult to oxidize the film, direct calcination, so that the surface of the easily oxidized material to form a dense oxide film, oil if the above can not help you, then you can try to use plastic film wrapped to see how the effect of hope the following protective measures are helpful to you: 1. Oil rust prevention, this method is too greasy and pollution, not only not beautiful, and the rust prevention effect is not ideal. The anti-rust effect of unclean oil is lower than that of desiccant and traditional paper packaging, and the cost is higher. 2. Antirust paper antirust: antirust paper is a kind of economic and environmental protection antirust packaging material, used for small volume of iron or non-metal parts packaging, transportation, storage; Antirust effect is quick and easy to use. With the best moisture-proof, rust - proof, corrosion - proof function. It also has the characteristics of long anti-rust time, safe use, beautiful packaging, low cost, and has been widely used at home and abroad, become an indispensable anti-rust material for industrial products and parts packaging, and is very suitable for the process of mechanical processing industry and storage anti-rust. Anti-rust film anti-rust: (features the same as before) to brush paint protection or wax spraying anti-rust: wax spraying is to spray a layer of wax protective film on the metal surface, so that the metal surface and moisture isolation, so as to achieve the purpose of anti-rust. When this method is simple to use and clear need hot water cleaning, are safe and environmentally friendly disposable anticorrosive materials in the past, mainly the use of nitrite in passivation agent, now in the market have special passivation solution, operation is convenient, practical can use osp (organic solderability protection), generally able to form homogeneous organic film on the copper surface to prevent the oxidation of the copper surface. It's very effective and it can also be treated with benzotriazole solutions, and it's not good to use one inhibitor alone, but you can use a combination, and the temperature is a little bit higher

Our factory

Production equipment

Testing equipment

Our Certification

CNC machining copper parts for solar equipment

Hot Tags: cnc machining copper parts for solar equipment, China, suppliers, manufacturers, factory, customized, custom, cheap, low price, made in China