Stainless Steel Tube With Flaring End

Product Specification Product Show These tools can only be used for flaring soft copper, aluminum and brass tubes. Do not use with corrosion-resistant steel or titanium. Cut tube vertically and remove all burrs. Slide the union nut and sleeve onto the pipe. Loosen the clamping screw used to lock...

Send Inquiry

Description

Product Specification

Product name	Stainless Steel Tube With Flaring End
material	Aluminum Alloy,Brass, stainless steel, steel, etc.
Surface Treatment	Anodizing, Sandblasting, Painting, Powder coating, Plating, Silk Printing, Brushing, Polishing, Laser Engraving
Machining Option	Turning, grinding, milling, welding, bending, drilling, swaging, flaring, slot-cutting, stamping, deep-drawing, capping, beveling, etc.
Tube Shape	Custom round, oval, square, rectangular
Custom feature	According to your 2D/3D Drawing or sample provided
Package	Standard carton or according to customer's requirement
Certification	ISO9001:2015, SGS

Product Show

These tools can only be used for flaring soft copper, aluminum and brass tubes. Do not use with corrosion-resistant steel or titanium. Cut tube vertically and remove all burrs. Slide the union nut and sleeve onto the pipe. Loosen the clamping screw used to lock the sliding section into the die holder. This will allow them to separate. These tools are self-measuring; When the pipe is clamped flush with the top of the module, a properly sized bell will be produced. Insert the tube between module segments corresponding to the size of the tube to be flamed. Push the clamping screw to the end segment and tighten it firmly. Move the yoke down to the top of the die holder and turn clockwise to lock it in place. Turn the feed screw down vigorously and continue until you feel slight resistance. This indicates that accurate flares have been completed.

TUBULAR COMPONENTS