Tube Reduction

Product Specification Product Show 1. Pipe feeding (1) Blanking should be carried out strictly in accordance with the design single line diagram, and the size of the material should be carefully checked before cutting. CNC shears straight strip blanking (error + or - 0.1mm) The material should...

Send Inquiry

Description

Product Specification

Product name	Tube Reduction
material	Aluminum Alloy, Brass, Stainless steel, Titanium, etc.
Surface Treatment	Anodizing, Sandblasting, Painting, Powder coating, Plating, Silk Printing, Brushing, Polishing, Laser Engraving
Machining Option	Turning, grinding, milling, welding, bending, drilling, swaging, flaring, slot-cutting, stamping, deep-drawing, capping, beveling, etc.
Tube Shape	Custom round, oval, square, rectangular
Custom feature	According to your 2D/3D Drawing or sample provided
Package	Standard carton or according to customer's requirement
Certification	ISO9001:2015, SGS

Product Show

1. Pipe feeding

(1) Blanking should be carried out strictly in accordance with the design single line diagram, and the size of the material should be carefully checked before cutting. CNC shears straight strip blanking (error + or - 0.1mm)

The material should be discharged reasonably according to the length of the pipe to reduce waste. For pipes with small quantity, large diameter, thick pipe wall and other special materials, the whole material should be discharged first and then discharged, and the amount of pipe should be strictly controlled. The cutting allowance of more than 100mm can not be treated as waste, but should be registered and kept according to the material for reserve.

(3) If the label of the cut pipe is damaged, the original label should be copied on the remaining pipe. Material identification requirements see Attached Table 4.

(4) Stainless steel pipe must be cut by mechanical or plasma cutting, the rest of the pipe can be cut by flame cutting and preparation of the groove, the incision surface should be smooth, no cracks, heavy skin, burr concave and convex, shrinkage, slag, oxide, iron chips, etc., should be removed in time.

⑸, the inclination deviation △ of the end face of the cut shall not exceed 1% of the outer diameter of the pipe, and shall not exceed 2mm.

TUBULAR COMPONENTS