What Should Be Paid Attention To When Processing A Stainless Steel Workpiece?

Stainless steel products because of its corrosion resistance, high temperature resistance and other characteristics, in our daily life is very widely used. So, in the process of stainless steel products processing what problems need to pay attention to?

1, tool material selection. Because of the processing of stainless steel parts when cutting force, high cutting temperature, cutting tool materials should be selected as far as possible with high strength, good thermal conductivity carbide.

The roughness value of the front blade surface should be small. In order to avoid the phenomenon of chip sticking to the knife, the front and back of the tool should be carefully grinded to ensure that there is a small roughness value, so as to reduce the chip flow resistance and avoid chip sticking to the knife.

2, the cutting edge should be kept sharp. The cutting edge of the tool should be kept sharp in order to reduce work hardening, and the feed and the back draft should not be too small to prevent cutting tools in the hardened layer, affecting the service life of the tool.

3, pay attention to the grinding of the chip breaker. Because the stainless steel chip has the characteristics of strong and tough, the cutting tool front chip groove repair and grinding should be appropriate, so as to make the cutting process interrupt chip, chip tolerance, chip discharge convenient.

4, the choice of cutting dosage. According to the characteristics of stainless steel materials, processing should choose low speed and large feed for cutting.

5, cutting fluid selection should be appropriate. Because stainless steel has the characteristics of easy to produce bond and poor heat dissipation, so in the boring selection of anti bond and good heat dissipation cutting liquid phase when important. Share from Qingdao Shengteng Zeyuan Industry and trade.

The introduction of the technological process, can overcome the processing difficulty of stainless steel, the stainless steel during drilling, reaming, boring tool life been improved greatly, and decrease The Times of operation knife, tool change in improving production efficiency and machining quality, reduce labor intensity and production cost, can obtain a satisfactory result.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com