What Are The Process Characteristics Of Aluminum Alloy Parts Processing?

Aluminum alloy parts processing is the most widely used a kind of anti-rust aluminum, its strength is not high, can not be strengthened by heat treatment, in the annealing state has high plasticity, and good corrosion, good weldability, bad cutting performance. It is used for manufacturing low load parts such as oil tank, tubing, liquid container and so on that require high plasticity and good weldability and work in liquid or gas medium. The wire can be used to make rivets. High corrosion resistance and good welding performance. The thermal and electrical conductivity is much lower than that of pure aluminum. It can be strengthened by cold deformation processing but not by heat treatment. Suitable for welding structural parts. The magnesium content of aluminum antirust aluminum is slightly higher than that of comparable strength, heat treatment can not be strengthened, high plasticity annealing state, semi-cold hardening plasticity medium, welding performance is good, used to make welding parts, pipes and containers and other parts working in liquid. It has high strength and corrosion resistance, good ductility under annealing and extrusion, and good gas tightness and ductility under argon arc welding. Good machinability. Used for welding containers, stressed parts, aircraft skin and skeleton parts.