Stainless Steel Pipe Processing, Cutting, Sealing

The incision is smooth and smooth, and can be cut by wire cutting, laser cutting, water knife cutting, etc

From the point of view of smooth requirements, watercutter cutting is undoubtedly the most smooth, but because of the pressure of the outlet, gradually weakened, the cutting surface will be beveled, but the small cross section of the slope can be ignored;

Laser cutting other no problem, is in the blanking place, there will be burning burr;

Wire cutting efficiency is the lowest, but the effect can fully meet your "incision smooth" requirements, according to your requirements, you can choose fast wire, wire, slow wire.

There are many ways to seal the tube, you can use interference fit sealing, thread sealing, welding sealing, viscose sealing and so on

Interference sealing of pipe wall thickness has certain requirements, too thin stainless steel pipe is difficult to carry out;

Thread sealing and interference sealing have certain requirements for wall thickness, on the premise of tapping out the thread, but also to ensure strength;

The welding seam is the most reliable, the premise is the welding process in place, the wall thickness to meet the requirements of the welding master can be easily done with argon arc welding, wall thickness can be laser welding, no friction welding, the welding is the strongest;

As the name implies, the adhesive seal is sealed with glue, which has the lowest reliability and cannot tolerate various industrial environments.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com