Stainless Steel Capillary Tube Hole How To Clean?

First, if the cleanliness requirement is low, the capillary tube is immersed in heated degreasing liquid, and then circulated and rinsed with gas or water. It's better if you have the right size brush to scrub back and forth. In short, to heat, to use the wall attached grease is very effective in dissolving dispersed degreasing solution or cleaning solution.

Two, if the cleanliness requirements are high, the use of ultrasonic cleaning, ultrasonic cleaning principle is ultrasonic in liquid transmission, sound pressure changes rapidly, resulting in a strong air phenomenon in the liquid, every second to produce millions of tiny cavitation bubbles. These bubbles are rapidly produced in large quantities under the action of sound pressure, and will not explode violently, but produce a strong impact force and negative pressure suction, enough to let the stubborn dirt quickly peel off.

Three, if the stainless steel capillary is relatively long, have their own water tank, you can buy an ultrasonic vibration plate into the water ultrasonic cleaning. If the time is short, the ultrasonic vibrator can be inserted into the pipe for cleaning, and then wash away the ultrasonic stripping dirt with running water.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com