Self-made Aluminum Alloy Case Design And Production

First of all, from the design, I believe that you have your own ideas in the shape of the case, so xiaobian will not say more, and xiaobian to give you a proposal is to design the internal structure of the host.

1. First of all, design a good cd-rom drive, floppy drive, interface position and space the number of interface needs to choose their own and graphics card, memory expansion also want to do enough space to choose.

2. The placement of the radiator, aluminum alloy itself of the nature of the problem, you can choose to water-cooled radiator and fan, radiator, first choose water-cooled radiator we can remove dust on the radiator interfere with the operation make the host running speed is reduced, and because of the aluminum alloy is a metal, metal thermal conductivity is fast, so choose water-cooled radiator can better improve the working speed of the case. The choice of fan blade radiator will mostly choose a combination of multiple to improve the heat dissipation effect, but dust will interfere with the operation of fan blade radiator, so the aluminum alloy shell needs to have metal filter facilities.

3. The bottom of the chassis can not have too much equipment, because close to the ground, the heat dissipation speed is slow, so in the design should pay attention to, and because the weight of the aluminum alloy chassis is lighter, so xiaobian recommends placing a heavier metal or object block at the bottom to reduce the host center, not easy to hit.

Production of aluminum alloy chassis when we measured the dimensions of the case, and the first to use aluminium alloy rods prepared a general framework, completes the solid overall effect, and the shell wrapped in aluminum alloy sheet metal in addition to outside the frame, a fixed hardware side of the metal plate needs more thicker than the other side, thin side to make it detachable type, convenient host can repair after out of the question.

Aluminum alloy case appearance beautiful, unique metal texture sense, but also many fashionable young people like to choose the object.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com