How To Solve The Defects in The Dispensing Machine?

1. First of all, of the specifications of the needle will influence in the process of dispensing the adhesive glue size and precision, when air pressure in a certain range, the greater the needle mouth, and the greater the rate, so according to the size of the dispensing machine in the produced products to the specifications of the anchor point glue needle, needle diameter in length to keep half of the adhesive dot diameter, the effect is best.

2. The size of the dispensing amount is determined by the length of time the dispensing machine lasts in the dispensing process. According to our experience test Settings, the size, thickness, dispensing time, dispensing speed, glue time can be changed at will, the quality of the glue, the amount of glue is stable, and the glue does not leak. Setting parameters for different products ensures that there is enough glue to hold the parts together, while avoiding the waste of resources caused by excessive glue.

3. The size of the pressure directly affects the speed of flow for glue and glue, glue the worse it becomes thick liquid, the greater the pressure on the it needs, so we should according to the environmental temperature in dispensing machine in the production process and the size of the point glue and glue properties to specify the size of the adjustment pressure, the pressure of glue size is adjusted by its internal pressure regulating valve.

4. According to the curing time of glue, set the temperature to cure, so that the glue has enough strength and hardness after curing, and also equipped with heat dissipation system, constant temperature system to ensure the service life of the machine.

5 bubbles for dispensing machine in the process of dispensing will affect the quality of the product, reduce the yield of the product, so our company developed and designed a trace precision dispensing head: not affected by the bubble in the fluid, to avoid the phenomenon of air dispensing machine. The yield of products, product quality is guaranteed.

6. The back suction dispensing valve is installed on the dispensing head to solve the problems of continuous glue and wire drawing of medium and high viscosity medium, and prevent the dripping and wire drawing of the dispensing machine when it does not work. It is suitable for filling medium and low viscosity medium such as lubrication, bonding, perfusion, sealing and sealing required by products of various industries. It has a wider application scope for glue.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com