What are the operating principles of CNC machining of aluminum alloy?

Aluminum alloy CNC machining compared to manual processing has a great advantage, such as CNC machining aluminum alloy parts are very accurate and repeatable;Aluminum alloy CNC machining can produce complex shape parts that cannot be completed by manual machining.Then how much do you know about the operating principles of CNC machining of aluminum alloy?

First, the use of CNC equipment environment.

In order to improve the service life of CNC equipment, it is generally required to avoid direct sunlight and other thermal radiation, and to avoid too wet, too much dust or corrosive gas places.Precision CNC equipment should be far away from the vibration of equipment, such as punch, forging equipment, etc.

CNC precision machining

Second, good power supply guarantee.

In order to avoid the power fluctuation range (greater than ±10%) and the possible instantaneous interference signal, machining CNC equipment generally uses a special line power supply (such as from the low voltage distribution room separately for the use of CNC machine tools) or additional voltage regulator, can reduce the influence of power supply quality and electrical interference.

Third, the development of effective operation procedures.

In the use and management of CNC machine tools, a series of practical and effective operating procedures should be formulated.For example, lubrication, maintenance, reasonable use and standardized shift system, is the main content of the use and management of CNC equipment.It is one of the important measures to ensure the safe operation of CNC machine tools to formulate and abide by the operation rules of aluminum alloy CNC machining.Practice has proved that many failures can be reduced by following the operating procedures.

As we all know, correct operation and maintenance is one of the key factors in the correct use of aluminum alloy CNC processing equipment, the correct operation can prevent abnormal wear and tear of the machine tool, to avoid sudden failure;Daily maintenance, equipment to maintain a good technical state, delay the deterioration process, timely detection and elimination of hidden trouble, always ensure safe operation.The daily use requirements of aluminum alloy CNC machining for precision parts processing enterprises are as follows:

1, after the boot, must be preheated for about 10 minutes, and then processing;The machine not used for a long time should extend the preheating time;

2. Check whether the oil circuit is smooth;

3. Before shutdown, place the worktable and saddle in the center position of the machine (move the three-axis stroke to the middle position of each axis stroke);

4. Keep the machine tool dry and clean.

Aluminum alloy CNC processing equipment is relatively expensive, so correct operation and maintenance can prevent abnormal wear and tear of the machine tool, to avoid sudden failure of the machine tool.Careful maintenance of CNC machining of aluminum alloy can maintain the long-term stability of machining accuracy and prolong the service life of machine tools.

Shenzhen Manners Technology Co.,Ltd is the supplier of some of the world’s famous international companies like Blum Novotest, Komet, Geneva Lab, BTL, etc... We specialize in telescoping parts, needle manufacturing, multi-axis CNC machining, Swiss-type turning, laser cut tubing, laser welding and automated assemblies for the medical, endoscopic, arthroscopic, orthopedic, firearms, defense, automotive, and specialty industrial markets.

Please contact us if you need: zhang@sz-manners.com.