Stainless steel tube processing, cutting, sealing

The incision is smooth and flat, and can be cut with wire cutting, laser cutting, water knife cutting, etc

From the smooth requirements, water knife cutting is undoubtedly the most smooth, but due to the outlet pressure, gradually weakened, cutting surface will be inclined, but the small cross section of the slope can be ignored;

Laser cutting other no problem, is in the blanking place, there will be burning burr;

Line cutting efficiency is the lowest, but the effect can meet your requirements of "smooth and flat incision", according to your requirements of different degrees, you can choose to go fast silk, silk, silk.

There are many ways to seal the tube, including interference fit sealing, thread fit sealing, welding sealing, viscose sealing and so on

Interference sealing has certain requirements on the wall thickness of the pipe, it is difficult to carry out stainless steel pipe too thin;

Thread sealing and interference sealing have certain requirements on wall thickness, in the premise of tapping thread, but also to ensure strength;

The welding seam is the most reliable, the premise is that the welding process is in place, the wall thickness meets the requirements, the welding master can easily do with argon arc welding, the wall thickness can be laser welding, no friction welding, the welding is the strongest;

Viscose sealing, as the name implies, is sealed with glue, the lowest reliability, and can not tolerate a variety of industrial environments.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com