CNC Machining Of Stainless Steel Turbine Blade Parts

Product specification

Product show

According to the force mode of connection, it can be divided into ordinary and reamed holes. The ordinary main bearing axial force, can also bear the requirements of low horizontal force. Bolts for reaming holes should fit the size of the holes and be used when subjected to transverse forces.

According to the head shape points: hexagonal head, round head, square head, countersunk head and so on. The hexagonal head is the most commonly used. Generally countersunk head is used to require connecting bolts

The rear surface is smooth without bumps because the countersunk head can be screwed into the part. Round heads can also be screwed into parts. The tightening force of square head can be larger, but the size is large.

In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rod, which can make the bolt not loose when it is vibrated.

Some bolts have no thread of the smooth rod to do fine, called the waist bolt. This kind of bolt is good for coupling under varying forces.

There are special high-strength bolts on the steel structure, and the head will be larger and the size will change.

In addition, there are special uses: T-groove bolts, the most used on the machine tool fixture, special shape, both sides of the head to cut off. Anchor bolts, used to fasten machines to the ground, come in many shapes. U-bolts, as described above. And so on.

There are special studs for welding. One end has thread and the other end has no thread. They can be welded to the parts and the other side directly screws the nuts.

Our factory

Production equipment

Testing equipment

Surface treatment equipment

Our Certification

CNC machining of stainless steel turbine blade parts

Hot Tags: cnc machining of stainless steel turbine blade parts, China, suppliers, manufacturers, factory, customized, custom, cheap, low price, made in China