The Working Principle Of The Dispensing Machine

The dispensing machine is the compressed air into the rubber bottle (syringe), the glue is pressed into the feed tube connected with the piston chamber, when the piston is in the upstroke, the piston chamber is filled with glue, when the piston pushes down the glue drop needle, the glue is pressed out from the needle nozzle. The amount of glue that drops is determined by the distance of piston flushing and can be adjusted manually or controlled in software.

The dispensing machine can be divided into two working modes:

1. Manual dispensing: manual dispensing machine is used manually to dispense on electronic products. The process method is simple, the cost is low, the disadvantage is that the dispensing efficiency is slow, and it will consume a lot of labor.

2, automatic dispensing: Fisnar dispensing machine principle is to use air pressure in the set time, the glue liquid out. The time of each infusion is controlled by the instrument to ensure the same amount of each infusion. As long as the pressure, time and appropriate needle nozzle are adjusted well, the amount of each infusion can be easily changed, which is convenient and accurate.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com