How To Debug Automatic Dispensing Machine To Achieve The Best Running State

1. The amount of dispensing should be half of the product spacing when setting the dispensing time of the dispensing machine, so that there can be enough dispensing amount to paste components and avoid excessive glue leakage. The amount of glue out of the automatic dispensing machine can be controlled by adjusting the dispensing time, and the actual production work can be set according to the environmental situation (workshop temperature, glue viscosity, dispensing speed, etc.) set the dispensing setting time.

2, the pressure of the dispensing machine set the amount of glue is provided to the hose and needle by the automatic dispensing machine controller. The pressure determines the amount of glue and the speed of dispensing. Strong pressure is easy to cause glue ejection and too much glue, which affects the aesthetic appearance of the product. Weak pressure will appear dispensing uneven phenomenon and leakage point, thus affecting product quality problems. In real production, the pressure should be set according to the viscosity of glue, the environment of the production workshop and the temperature. If the temperature is too low, the viscosity of glue will increase and the fluidity will deteriorate. At this time, the pressure value needs to be increased, and vice versa.

3, the size of the needle of the dispensing machine in real production, the diameter of the needle inside the needle should be the same as the radius of the glue point. In the dispensing work, the needle can be selected according to the size of the product. Products of different sizes should choose suitable needles, which can benefit the automatic dispensing machine for dispensing operation, and there is no glue point problem. The height from the dispensing needle to the circuit board and the needle diameter are the most important parameters.

Automatic dispensing machine minimum dispensing standard amount of 0.005 ml less, stainless steel needle minimum diameter is 0.1 mm. Minimum inside diameter of needle 0.1 mm. Automatic dispensing machine has special needle diameter can reach 0.02 mm.

If you have any questions, please contact us. Our company can produce various customized needles, medical needles, puncture needles, hypodermic needles, biopsy needles, vaccine needles, injection needles, syringe needles, veterinary needles, pencil point needle, ovum pick up needles, spinal needles, etc. If you need customized needle products, please contact us. We look forward to your inquiry! The quality of the products manufactured in our factory will surely satisfy you!

Please contact us if you need: zhang@sz-manners.com